DSC 3070 GSM PDF
3G Universal Cellular Wireless Alarm Communicator 3GRF 3G -ADT ADT DSC GSM 3G Universal Cellular Backup Wireless Alarm Communicator. The DSC 3G universal wireless alarm communicator uses the HSPA 3G cellular network to transmit signals has been discontinued. The DSC’s 3G has. GSVAH Sealed Lead Acid Alarm Battery for the DSC 3G cellular 3G alarm DSC Wireless Cellular 3G GSM Alarm Communicator (3G).
|Published (Last):||27 November 2011|
|PDF File Size:||12.35 Mb|
|ePub File Size:||15.67 Mb|
|Price:||Free* [*Free Regsitration Required]|
GS-12V1.3AH – DSC 3G3070 Cellular Communicator Back Up Alarm Battery
Page 23 Access cards or tags returned for replace- purchase, the product shall be free of defects in materials ment under warranty will be credited or replaced at DSC’s and workmanship under normal use. Table Of Contents Installing the 3G The 3G has four open collector outputs capable of a maximum of 50mA. During the warranty option. DSC Software purchased with or without Products and Components is copyrighted and is purchased under the following license terms: By pressing ‘print’ button you will print only current page.
The 3G will not show signal strength until the SIM is active. If this LED flashes, the following list indicates the specific trouble based on the number of flashes, by priority. Outputs The 3G has four open collector outputs capable of a maximum of 50mA.
Table of Contents Add to my manuals Add. Description 4 hours standby power capabilities. Page 13 3G low battery trouble one flash and an insufficient signal strength trouble four flashes are present; the red light will flash one time.
Got it, continue to print. Page 17 – 24h Test Transmission must be enabled on the dialler and on the 3G Internal events on the 3G can trigger the outputs to turn on an LED or activate an input on the host panel.
The entire manual should be carefully read. Don’t have an account?
When powering the 3G Radio by an This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manu- facturer. Jumper JP3 does not limit the electrical current available on this output.
After the 3G generates a Kiss-off signal, it sends the next alarm or, if no further alarms need to be sent, the control panel goes on-hook. Page 22 This equipment generates and uses radio frequency energy the end user. This manual contains information on limitations regarding product.
Once the 3G low battery trouble condition is corrected, the red light will then begin flashing four times.
3G3070 – DSC Wireless Universal Cellular 3G Alarm Communicator
Don’t show me this message again. Also See for 3G Installation manual – 24 pages. Internal wiring must be routed in a manner that prevents: The default settings are as follows. Comments to this Manuals Your Name. YELLOW light will flash one time when the signal is transmitted and two times when it gets a kiss-off. Access cards or tags returned for replace- purchase, gs product shall be free of defects in materials ment under warranty will be credited or replaced at DSC’s and workmanship under normal use.
When turned on, the 3G checks for the trouble conditions to be restored in the order listed below.
Products not rsc by this warranty, or other To print the manual completely, please, download it. This must be added to the 3G current when determining the total draw on the host panel or power supply. The 3G indicates the status of the highest priority, unrestored trouble condition with the corresponding number of flashes of the red LED.
HSPA (3G) Universal Cellular Alarm Communicator – 3G Security Products | DSC
Electrical current drawn from this terminal is drawn directly from the power supply. Page of 23 Go. Enter text from picture: This equipment generates and uses radio frequency energy the end user.